ITEM QTY DESCRIPTION 1 1 ¾" Thermostatic Valve Body 2 1 High Flow Thermo Cartridge 3 1 Cartridge Locknut 4 1 Stop Ring 5 2
› Place thermal valve body into vise and secure tightly. Figure 1.1 › Using stamp tool, place in proper location shown in Figure 1.2. After stamp
› Make sure that the J-TH34 cartridge is used. The difference between the J-TH34 and the J-THVC12 is identified in Figure 2.2› Inspect the thermal
3 INSTALLING AND TIGHTENING STOP LOCKNUTS Objective: Install locknuts for check stops and thermal cartridge. › Place thermal valve body on table wi
4/5 PRESSURE TEST Objective: Perform air in water pressure test.INSPECTIONJ-TH34 | PG 5› Install male adapter to both hot and cold water inlet. F
6 COMPLETE ASSEMBLY Objective: Complete final assembly.J-TH34 | PG 6› Ensure thermal valve is oriented with the cold water inlet on the right and
7 PACKAGING Objective: Effectively package completed thermal valve for inventory.J-TH34 | PG 7› Using box (#192066), tape base together. Figure
Kommentare zu diesen Handbüchern